About Store Forum Documentation Contact



Post Reply 
Problem which compatyblity texture and obj
Author Message
rafalfocus Offline
Member

Post: #1
Problem which compatyblity texture and obj
Helo I have a problem whit compatibility my CInema 4d and Mesh Editor look below on screenshot
This is my model which i made in cinema:
[Image: test_6.jpg]

Evrithing is fine but my problem have begin when i export model to format file .obj and open this in mesh editor look below

[Image: test1.jpg]

Do you see this hole...mesh editor not take n-gons ? or something ? :( it is few problems. I have too problem which Textures, always when a make texture in cinema to file jpeg so it's alway wrong look below

[Image: test2.jpg]

I use projection in cinema uvw mapping but I can change this to cubic or other projection but always something is wrong ;( textures not spread good in model at mesh editor...

Can you doing somting ? it's very important for me..Thanks a lot for replay also can you writing to this message in polish laguage becouse me english in reading is not so good... Thanks agine.
Rafal
02-21-2010 01:25 PM
Find all posts by this user Quote this message in a reply
Esenthel Offline
Administrator

Post: #2
RE: Problem which compatyblity texture and obj
you can send me the source files c4d, textures, .. to my email esenthel@esenthel.com
02-22-2010 04:53 PM
Find all posts by this user Quote this message in a reply
rafalfocus Offline
Member

Post: #3
RE: Problem which compatyblity texture and obj
Something news in this topic ? I ask becouse all people in my team working in cinema 4d and we are need fix this very quick ;] so if you can change this I will be thanksful for fixing and information about this.

Ps: Do you get the files which I send to you ?

Thanks Rafał
(This post was last modified: 02-25-2010 12:03 AM by rafalfocus.)
02-25-2010 12:01 AM
Find all posts by this user Quote this message in a reply
Esenthel Offline
Administrator

Post: #4
RE: Problem which compatyblity texture and obj
Hello,
yes I received the files, I will be checking the in the next few days (got some work before that)
02-25-2010 12:06 AM
Find all posts by this user Quote this message in a reply
Esenthel Offline
Administrator

Post: #5
RE: Problem which compatyblity texture and obj
in the next EE release the collada dae importer will handle this model
03-02-2010 06:43 PM
Find all posts by this user Quote this message in a reply
rafalfocus Offline
Member

Post: #6
RE: Problem which compatyblity texture and obj
Thanks you, I will very happy smile I download today ver I thing it is ? ;]
I download today and how i can use my texture ? I impose texture to material and nothing change, its like post up hmm or its not this ver ? how use collada in Esenthel or i bad writing,reading
(This post was last modified: 03-03-2010 09:44 AM by rafalfocus.)
03-03-2010 09:25 AM
Find all posts by this user Quote this message in a reply
Esenthel Offline
Administrator

Post: #7
RE: Problem which compatyblity texture and obj
previos release didnt import texture coordinates from dae files exported from cinema 4d
now they are imported correctly, as well as triangles (no holes)
I've checked this and it is working correctly
03-03-2010 02:02 PM
Find all posts by this user Quote this message in a reply
rafalfocus Offline
Member

Post: #8
RE: Problem which compatyblity texture and obj
Up: dalej mi się texturka nie rozklada prowidlowo na modelu...jak to zrobić by była poprawna ?
Pozdrawiam
(This post was last modified: 03-06-2010 10:50 AM by rafalfocus.)
03-03-2010 05:50 PM
Find all posts by this user Quote this message in a reply
Esenthel Offline
Administrator

Post: #9
RE: Problem which compatyblity texture and obj
prosze wkleic jakies screeny z rezulatow
03-03-2010 08:49 PM
Find all posts by this user Quote this message in a reply
rafalfocus Offline
Member

Post: #10
RE: Problem which compatyblity texture and obj
Problem jest ten sam co wyzej, wczytuje teksture do materialu w mesh edytorze i nie rozklada ona sie na model prawidlowo tylko tak jak na screenie nr3 up, hmm jak mamy to zrobic by sie rozkladala na modelu prawidlowo zaloczonym w pierwszym screnie z cinemy ? prosze o odp i dziekuje z gory.
pozdrawiam.
03-05-2010 11:24 PM
Find all posts by this user Quote this message in a reply
Esenthel Offline
Administrator

Post: #11
RE: Problem which compatyblity texture and obj
z tych plikow co odebralem jesli dobrze pamietam to byla taka dziwna tekstura z bialymi plamami w katalogu obj special plugin
byly tez inne tekstury ktore prawidlowo dzialaly
03-05-2010 11:31 PM
Find all posts by this user Quote this message in a reply
rafalfocus Offline
Member

Post: #12
RE: Problem which compatyblity texture and obj
Nie zrozumielismy sie, z dziura jest juz ok smile lecz problem jest w tym iz tekstura w katalogu "standard export from cinema to obj" pod nazwa fortecacolor".jpeg zrobiona jest w cinemie, model tez z cinemy ladowany jest do mesh edytora to samo z tekstura wlasnie fortecacolor.jpeg ladowana jest do ME jako material i nie rozklada sie prawidlowo na modelu jak na screnie 3 powyzej, tu jest problem poniewaz cinema troszke dziwnie tworzy sobie uv mape, no i wlasnie po exporcie kompletnej tekstury utworzonej w cinemie nie da sie jej nalozyc na model tak aby wygladala w ME jak na screnie 1 z cinemy smile
(This post was last modified: 03-06-2010 12:07 AM by rafalfocus.)
03-06-2010 12:05 AM
Find all posts by this user Quote this message in a reply
Dynad Offline
Member

Post: #13
RE: Problem which compatyblity texture and obj
Why in other language then English? if someone else has a similar problem, you can't read if u don't speak polish.

There is always evil somewhere, you just have to look for it properly.
03-06-2010 12:40 AM
Visit this user's website Find all posts by this user Quote this message in a reply
rafalfocus Offline
Member

Post: #14
RE: Problem which compatyblity texture and obj
Don't worry if i done problem i translate or esenthel this message...;]
03-06-2010 09:49 AM
Find all posts by this user Quote this message in a reply
Esenthel Offline
Administrator

Post: #15
RE: Problem which compatyblity texture and obj
uzyskalem ten sam efekt co na 1 screenie jak przerzucilem druga teksture (nie ta z bialymi plamami)
03-06-2010 01:45 PM
Find all posts by this user Quote this message in a reply
Post Reply